Japanse zaag Ryoba - Suizan SR 001 (vervangblad)
Replacement Ryoba sawblade for Suizan SR 001
This versatile Japanese Ryoba pull saw has a 24 cm blade that is only half a millimetre thick, with different teeth on each side. One side is intended for rip cuts, cutting along the grain of the wood. The other side is used for fine and accurate cuts across the grain.
Thanks to the combination of two different tooth patterns, the Ryoba is suitable for a wide range of tasks, including cutting wood to length, making joints and general fine woodworking. The long handle provides excellent control and allows the saw to be guided accurately.
Japanese saw
Unlike a traditional European handsaw, a Japanese saw cuts on the pull stroke. This allows the blade to be made thinner and requires less effort. The result is a narrow, clean cut with minimal material loss.
Replacement blade
This is the saw blade only. You can find the complete saw with handle here.
Features
- Type: Japanese Ryoba pull saw
- Suitable for: rip cuts and crosscuts
- Blade length: 240 mm
- Blade thickness: 0.5 mm
- Teeth: 9 and 15 TPI
- Kerf width: approximately 0.8 mm
TIP
Use the saw without applying excessive downward pressure and let the sharp teeth do the work. Pull the saw steadily towards you and avoid twisting or applying sideways pressure to the thin blade while cutting.